location:Index > ISO > Green product certification process

Green product certification process

Source:YueFei Business consulting     Date:2021/10/21 13:40:01   |    Share    Collection   
Scope of application. This rule is applicable to the green product certification of the products in the application catalogue produced by enterprises themselves.






Certification mode: initial inspection + product sampling inspection + post-certification supervision






3 Certification process and certification time: 1) certification application 2) initial inspection 3) product sampling inspection 4) Evaluation and approval of certification results 5) Post-certification supervision Note: Initial inspection includes data technical review and on-site inspection. Generally not more than 90 days, including the initial inspection, evaluation and approval of the certification results, and the time for making the certificate.






4 Certification application certification unit division, certification based on standards, the certification client to the certification body to submit the certification application, accompanied by the following documents and responsible for its authenticity: 1) written application; 2) To certify the business licenses of the client, the manufacturer and the factory; 3) Certification of the entrustment relationship between the client, the manufacturer and the manufacturer (such as power of attorney, etc. If the entrusted party is a dealer or importer, the contract certificate signed between the dealer and the manufacturer or between the importer and the manufacturer shall also be submitted); 4) OEM/ODM proof of intellectual property relationship (where applicable); 5) Product process flow chart; 6) Organization chart of production plant; 7) Type inspection report of product quality level conforming to relevant standards (issued by CMA qualified inspection agency and valid within one year); 8) The manufacturer shall establish and operate the quality management system, environmental management system and occupational health and safety management system according to GB/T 19001, GB/T 24001 and GB/T 45001 respectively; 9) Submit the record list of key raw materials according to the certification unit (see Attachment 1); 10) Letter of commitment to certify product quality assurance;






5 initial inspection data technical review site inspection






6 Product Sampling Inspection Product sampling inspection can be completed before or at the same time with the on-site inspection






7 Evaluation of certification results and approval of the certification body of product sampling inspection, initial inspection conclusions for comprehensive evaluation. After passing the evaluation, the certification body shall, in principle, issue the green product certification certificate to the certification client within 5 working days, and each certification unit shall issue a certificate.






8. Supervision after certification. Each supervision shall cover all manufacturing enterprises (sites) and cover all valid certificates. The contents of supervision shall include: 1) supervision and inspection of factory guarantee ability; 2) Product consistency supervision and inspection; 3) Green evaluation requires continuous conformity verification; 4) Supervision and inspection; 5) The validity verification of the rectification measures of the last certification non-conformance, the use of certification certificates and marks, the implementation of laws and regulations and other requirements, etc.






9 Expand or narrow the application. Range, of the validity of the certificate authentication client needs before the next annual supervision and inspection, supervision and inspection of the annual extension when certification unit, product name and model number, authentication client should be started formalities, apply for certification bodies should be the consistency of the evaluation of extension products with the original certification products, as well as the original certification result for expanding the effectiveness of the content, At the same time according to the following requirements for on-site inspection: 1) for the need to expand the certification unit before the next supervision and inspection, the certification body should at least from the factory quality assurance ability supervision must check terms, green evaluation requirements compliance, product consistency three aspects of the supplement is 10 inspections. The number of on-site inspectors per extension unit shall not exceed 2 person-days. On this basis, 1 person-day shall be added for each additional authentication unit. 2) For those who need to expand the certification unit during annual supervision and inspection, the requirements shall be the same as chapter 8, and each extension of one certification unit shall add one person day. 3) For products and models that need to be expanded before or during the next annual supervision and inspection, the number of on-site inspectors can be increased as appropriate. For the need to reduce the certification unit in the annual supervision, the number of on-site inspectors should be reduced as appropriate.






10 Certificate The validity period of the certificate is five years. The validity of the certificate is maintained through regular supervision. If the validity of the certification certificate expires and needs to be extended, the certification client shall apply for extension within 90 days prior to the expiration of the validity of the certification certificate. The certification body shall issue a new certificate directly after receiving the extension application if the supervision result is qualified after the last certificate is obtained within the validity period.






11 Use of authentication identifiers. Enterprises that have passed the certification and obtained the certification certificate can use or display the green product logo on the approved product body, nameplate, packaging, attached documents (such as instructions, certificates, etc.), operating system, electronic sales platform and other locations, as shown in Figure 1. When using logos, the licensed enterprises should comply with the requirements of Administrative Measures on The Use of Green Product Labels issued by The State Administration for Market Regulation (Announcement No. 20, 2019 of the State Administration for Market Regulation) and the administrative requirements of license-issuing organs on logos.


Current green product certification directory






1. Wood-based panels and wooden floors






2, sanitary ceramics






3. Building glass






4. Solar water heating system






5, home






6, insulation material /






7, waterproof and sealing materials






8. Ceramic tile (board)






9. Textile products






10, wood plastic products






11. Paper and paper products

 

【Related reading】:

Editor in charge:Shanghai Yue Fei Enterprise Management Consulting Co., Ltd.
Copyright:http://www.yf-iso.com/ Please indicate the source of the reprint

Tel:021-62201932   Phone:18916381081   
Add:Room 201, Ming Hui building, 442 Hami Road, Changning District, Shanghai

Shanghai Yue Fei Enterprise Management Consulting Co., Ltd. all rights reserved.  © All rights reserved.
yf-iso.com ICP:10202224